1 / 5
Cupped Drawer Pull - Parametric, Press-Fit, Tool-Free Installation — zdjęcie 1
1 / 5

Cupped Drawer Pull - Parametric, Press-Fit, Tool-Free Installation

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Press-fit cupped drawer pull with parametric design, prints in 3 parts and mounts cleanly to cardboard.

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
42
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This 3D-printable Cupped Drawer Pull is designed for quick, clean, and hardware-free installation. Designed for cardboard drawers. The pull uses a simple but reliable press-fit pin mechanism, eliminating the need for screws or adhesives.

Features

  • Tool-Free Press-Fit Mounting
    The pull attaches using a two-piece pin + plate system. Press the parts together from both sides of the drawer and the mechanism locks everything in place.
  • 3 Part Design
    • 1x Drawer Pull
    • 2x Pin
    • 2x Pin Plate
  • Optimized for 1/8" (3.2 mm) Cardboard
    The default pin is sized for common corrugated cardboard or similar thin panel materials.
  • Includes Two Pin Variants
    • Zero added tolerance
    • +0.2 mm tolerance for easier fit depending on your printer calibration or material choice
  • Fully Parametric (Fusion 360 Archive Included)
    Customize pin size, pull dimensions, material thickness using the provided Fusion 360 parametric model.

Printing Notes

  • Supports are recommended for the drawer pull part to ensure cleaner overhangs and sharper geometry.
  • All parts print flat for strength and ease of printing.  You may need to “Lay on Face” the pin and plate.
  • Small pin parts benefit from good cooling and slower outer walls.

This is a simple, sturdy, and highly customizable solution for upgrading cardboard or DIY drawers. Enjoy printing and modifying it!

Tagi