1 / 2
Fungineers Funwheel X7/X10 mini fender with mud flaps (another version)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fungineers Funwheel X7/X10 mini fender with mud flaps
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 77
- Wydruki
- 2
- Wyświetlenia
- 501
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 10)Remiksy (3)Kolekcje (12)Powiązane
The front and rear fenders are the same, and the rear mud flap is unchanged from the original. The front mudflap is cut away to make room for the bend in the X7 rails. If mounted on X10, flat or other rails, you can use the rear mudflap model for both front and rear. Original author recommends 100% infil but without footholds, 30% seems plenty strong to me. I used PETG for fenders and TPU for mud flaps.
