15mm Modern Soldier-Scale US Stryker IFV
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
15mm / RISK-scale wargaming miniature Stryker IFV
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Public Domain
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a US Stryker Infantry Fighting Vehicle, but it is similar to the Canadian LAV III - probably similar enough to pass for one if provided a different turret. Included are an autoturret for the regular IFV/APC version or a larger Dragoon 30mm cannon turret - both options need to be glued on and the Dragoon cannon needs to be glued in. I might make other turrets but these are the most relevant to the tactical-scale games I planned. Printed for me without supports on a Prusa Mini with a few grams of filament in about an hour. Would also work great for a modern-RISK replacement figure, possibly also A&A.
I do plan to make nation-specific vehicles as time and interest allow. Printed in PLA at 0.1mm using the basic settings without supports, brim, or otherwise; YMMV.
Dropping it into public domain because it isn't especially complicated and I don't want to limit future uses.