Tak PrintABlok - A Beautiful Strategy Board Game
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A PrintABloked version of the beautiful game Tak by James Ernest and Patrick Rothfuss
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 410
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Tak is a beautiful game for 2 players where players attempt to build a road across the board from either side to the side opposite. On their turn, players can place a piece or move a stack of pieces, dropping at least one as they go.
This PrintABlok version of the board uses pieces from PrintAQuest, the Modular Adventure Game. At regular size this is a travel version of Tak. If you'd like a more regular version, scale up everything 150% when you print it.
Recommended Print Settings:
- 0.16mm layer height at most
- 3 walls/shells
- Print connectors in PetG. (What ever filament you want for the rest.)
To make your Tak PrintABlok board:
- 3D Print the Following:
- 2x P102 PrintABlok -12 Standard Connectors.stl in PetG
- (Optional from the Parts Folder) 2x 102s_Slip_Connector.stl in PetG
- Tak PrintABlok-Plate 1-6
- (Optional) 924 Box 8x8x2.stl
- (Optional) 2x Tak PrintABlok Piece Container.stl
- (Optional) Tak PrintABlok-8x8 Tak Box Insert.stl
- Assemble according to the build illustrations.
(The yellow connecting lines are where “H” type connectors should be used.)
Build the walls:
Assemble the Floor:
Add the Walls:
Shrubbery:
(Optional) Put the box insert in the box. Put 2 of the piece containers in the box. Put 2 slip connectors and 2 H connectors in the top connector holes of the box. Put the board on the box like a lid:
Complete:
