AYN Thor Trigger Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3d printable triggers for the Thor to be a bit more comfortable than the stock ones.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 205
- Wydruki
- 0
- Wyświetlenia
- 4086
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this model kinda quickly and not professionally at all so there's still room for improvement, but I was able to get a good fit using a 0.2mm nozzle. Ideally a resin printer would be used but I don't have that. I've only tested the fit of the triggers as I don't want to risk messing up relocating the magnets from the stock triggers. Just going off the fit however, it was much more comfortable than stock.I printed mine in the orientation the model loads in, but it might not be completely optimal. Feel free to experiment with different print orientations.
For the left trigger just mirror the model.
Feel free to try and tell me how it goes and what should be changed!