1 / 2
502 Glue Stand || Chân đứng keo 502 — zdjęcie 1
1 / 2

502 Glue Stand || Chân đứng keo 502

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

502 glue very easy to fall and dangerous. So I designed a sturdy stand for it.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
22
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

About

502 glue is a cyanoacrylate super glue. However, its thin design makes it very easy to fall and dangerous. So I designed a sturdy stand for it.

For those who don't know, preserving cyanoacrylate glue is essentially preventing maximum oxygen contact with the glue to prevent it from hardening. A needle is usually included with the product so we can cover the nozzle for preservation. In my experience, you should only insert it a little bit (like  the below pictrue) to make it easier to take out later, if it accidentally hardens a little, we can still cut the nozzle a little and continue using it.

Cho ai chưa biết thì cái keo 502 này sẽ đông cứng khi gặp oxy nên khi bảo quản chỉ cần cắm cái kim đỏ vào cái vòi để bịt kín là được, cơ mà đừng cắm sâu qua để sau này dễ rút ra với kể cả nó có bị đông cứng một chút ở cái đầu thì vẫn cắt đi dùng tiếp được. 

Print setting

  • Nozzle: 0.4mm
  • Layer height: 0.2mm
  • Wall: 2
  • Top: 4 layer
  • Bottom: 3 layer
  • Infill: Gyroid 10%
  • Support: no
  • Brim: N/A