After kind of Herrnhuter Christmas Star
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A strong version they not need glue for assembly
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 382
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Prolog
I looked at various stars and wasn't satisfied with any of them because they required too much glue, the plug-in system didn't work or was too conspicuous. So I created my own version from scratch.
Parts
1x _center.stl
8x _short.stl
18x _long.stl
Printsettings
General
Nozzle: 0.4mm
Material: Petg transparent
Layerhigh: 0.2mm
_center.stl
size 100%
3 Walls
30% cubic infill
4 top layer
4 bottom layer
Brim
Support for top and bottom square
_short.stl
size 99%
2 Walls
0% infill
4 top layer
2 bottom layer
_long.stl
size 98%
2 Walls
0% infill
4 top layer
2 bottom layer
Not tested modell;
_top.stl
size 99%
2 Walls
5% grid infill
4 top layer
2 bottom layer
Not tested modell;
Assembling Light
I use
https://www.amazon.de/dp/B0CCS2YB3K?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
as light for the star