Litophane Laterne für LED Panels und 4x 15x10 Bilder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Eine Laterne für die schmalen LED Panels aus den Sets für Bilderrahmen. ( Bestellt aus weitweitweg) Latern for Litophane
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Da mir die gefundenen Modelle nicht so gefallen haben, oder nicht passten, habe ich mich ran gesetzt und mit meinen rudimentären Skills in Fusion diese Lampe gebaut.
Kabel durch den Fuß führen, anschließend je ein Panel mit Verbindungskabel versehen, anschließen und in den Slot im Boden stecken.
Der kleine Rahmen ( LED Fix) soll nur die LED Paneel oben in Position halten.
Anschließend Deckel drauf setzen und fertig.
Ich hoffe es gefällt.
English ( I try..)
I didn't find a Modell matching my needs, so I build this one myself.
Put the Cable through the Socket, stick the panels in their slot after connecting the cables, the small frame (LED Fix) is for fixation of the LED Panels on top, and then just close it with the Top Plate “Deckel”
Daten: ( Facts)
Litophane Laterne ( Lantern)
4 Pictures
10x15 cm ( max 2,5mm dicke (thickness)
cmyk LED Backlight Set aus 4 Einzel Paneelen - nicht das große für einen Einzelrahmen ( Set of 4 smaler Panels, not the big Panel for single Frame)