ATOTO 9" fascia plate/adapter RAV4 (gen2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this adapter for my 2005 second generation RAV4 so can mount the 9 inch atoto x10 neatly on the dasboard.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The double din 9" atoto X10 is all you need in addition to this fascia plate, to make your life easier I do recommend looking for a wiring loom to go from the stock connectors to standard ISO…. but i didn't and manually connected all the wires to the harness and that worked fine but was more work.
You only need 2 M4x8 screws that connect the screen to the printed part and then you can just click it into the square hole where the old radio used to be.
I recommend hooking the left side in first, then the bottom one and then with a slight press and some butt clenching you can “click” it into place.
When removing it i recommend starting on the right side and pulling it out of the dashboard from there.
I'm not sure how it would fit on the earlier gen2 RAV4 models because i know the dashboard is different.
Don't forget to check out my steering wheel control mounting!