Vevor Belt grinder upgrades
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 vevor belt grinder upgrades: controller box, spark catch, bigger plate
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
3 makes posted here:
Controller holder: A little box for the controller. I have marked the mounting holes and cut two 5mm threads to mount it. You can cut thread or glue it if you dont feel like cutting thread.
Spark catch: 150x150mm spark catch with a spout for vacuum or just put a bucket under it. Below link has the onshape project to adjust to your vacuum hose size. If you want to adjust it in onshape set the Vacuum outer diameter sketch size considering the wall is 3.2mm
Bigger plate:
This is a bigger plate for the grinder to use knife grinding jigs. For this you need a laser cut service like sendCutSend in the US, or just find a metal workshop near you, many have lasers or jets. You will need to weld the triangle part to the plate. A basic stick welder will do, just make sure it is square.
The workplate should be 8mm plate, the other two part 10mm plate. You will need to cut M8 thread in the 7mm holes provided. Treat it with cold blue and wd40.