Flexible SkiDock with Encased Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of @WesleyEccles_771810 SkiDock that encases the magnets and has a customizable logo plate.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
FlexibleSkiDock with Encased Magnets: This is a remix of SkiDock such that the magnets are encased into the SkiDock during the print; added a frame such that a logo plate can be easily glued into place. Printed in TPU to obviate the need for rubber pads and to improve the flexibility to adhere to curved vehicles. There is a Ragged Mountain logo and blank plate for personalization.
________________________________________________________________
Print Instructions:
- Resolution: 0.2 mm
- 15% fill (grid)
- Sliced with Bambu Studio
- Textured PEI plate
- Print was paused before layers 68 and 176 to insert the (8) 60 x 10 x 3 mm Neodymium Bar Magnets
Orange: DuramiC 3D TPU
- male
- female
Black: DuramiC 3D TPU
- Ragged plate (Printed face down so the front of the logo gets the texture)
- blank plate
________________________________________________________________
Assembly: I used THF (tetrahydrofuran) to fuse the parts together based on this video. I’ve also used crazy glue; however, the excess dried glue leaves a white residue. Apply THF to both the female and male parts and line them up quickly. After a few minutes, apply THF to SkiDock only and then press the smooth side of the plate into the SkiDock. No clamping required; let dry 24 hrs before using.