1 / 2
A4T THB mount for WWBMG and TAP carriage
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reworked A4T THB mount to clear the tap carriage pcb on the back
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 373
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Very simple change, took the original toolhead board mount and removed the bottom screw point to allow clearing the tap carriage pcb. Also lowered the motor mounting holes to raise the toolhead pcb by 5mm.
Works with A4T and WWBMG extruder + ebb36 or similar board