1 / 2
3" x 5" Frames for Index Card Signs or Small Photos — zdjęcie 1
1 / 2

3" x 5" Frames for Index Card Signs or Small Photos

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Several variations of 3" x 5" frames with stands for making signs with standard index cards or for use with small photos

Ocena
0 / 5
Polubienia
3
Pobrania
28
Wydruki
0
Wyświetlenia
146
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Share Alike

I originally designed these frame stands to be used with standard 3" x 5" index cards so I could make small, easy to change signs.  However, after making some of these, I had family members and friends who also liked them as small picture frames.  The frames have a slot on the top that allows an index card or picture to easily slide in or out.  There is enough play in the slot that the card or picture will not get stuck and slides in easily.  If you are using these for small signs that you may want to change regularly, the slot is large enough for you to put 2 or 3 index cards back-to-back where you can easily swap which one is visible at the front of the frame.

My original test designs (shown in the second picture printed in the clear PLA) was a bit thin for what I wanted where the back part of the frame, behind the opening, will flex when pushed on.  Also, the base of this original design being 1" wide made it somewhat easy to knock over.  That lead me to create the second version (shown in the first picture printed in black PLA) which has a 50% thicker frame and has a 1.5" wide base to make it harder to knock over.  I decided to include both versions here as just in case you would prefer the thinner designs to save filament.

There are a total of 8 different versions of the frame provided.  There are both horizontal and vertical versions based on what orientation you need.  Any of the files labeled “thin” are the original thinner versions as mentioned in the previous paragraph.  There are 4 other variations of these labeled as “no support”, which are modified to remove the top, overhanging part of the frame over the front opening as this is the only part of the design that requires supports if printed standing up.  Since you may be printing these with material that makes support removal difficult or you just may not want to deal with supports, I have provided these versions to make these frames more convenient.

Tagi