Triquetra trellis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Decorative wall art and indoor trellis in shape of a simple Celtic knot: the Triquetra.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
This wall installation in shape of a Celtic knot triquetra will guide and support light plants. It's made of two parts: the mount, which is nailed to the wall, and triquetra, which slides over it and is held in place by magnets. The mount offers 14mm clearance for the plant.
You'll need:
- 6 magnets of 10mm diameter, 2mm tall
- 2 nails (6D penny size / <3.1mm diameter)
When slicing, pause the print to place the magnets in the model before sealing them. Pause triquetra.stl on layer 59 (11.80mm) and triquetra mount.stl on layer 111 (22.20mm). You can use the .3mf file where I added the pauses at the right layers. The parts need no supports and triquetra.stl prints well with bridges. You may cut the mount to lower the 14mm clearance for plants and effectively increase the length of the nail in the wall.