StressLess Glide-System gliders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the "plastic" glider for the stressless recliner chairs.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
I created this for my stressless chair after noticing that only paid options were available.
If your chair resembles the one in the photo, the gliders are likely to fit.
There are two on each side, making a total of four for a single chair.
The 1of2 plus 2of2 refers to one side, while the 2in1 is simply the combination of both.
Print settings:
Use PETG
0.2 mm layer height
80%+ infill.
There is a breakaway print base that can be snapped off, before mounting.
Note: I created multiple versions of this part, and with the mentioned settings, it will function perfectly.