1 / 5
Modular DIN rail mount for WAGO 221-4xx and 221-6xx series — zdjęcie 1
1 / 5

Modular DIN rail mount for WAGO 221-4xx and 221-6xx series

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It's a modular DIN rail mount for 221-4xx series and 221-6xx wire connectors.

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
200
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
GNU General Public License v3.0

Overview

This project presents a fully modular DIN-rail mounting ecosystem designed for the Wago 221-4xx series (lever block connectors) and the Wago 221-6xx series (inline connectors).
The system brings a professional, organized, and scalable wiring solution inspired by industrial PLC racks and terminal block architectures.

Using a simple Start → Mid → End assembly concept, this design allows you to scale the holder to any number of connectors while maintaining perfect alignment and a clean appearance — just like commercial automation hardware.

🔧 Key Features

🧩 Modular Start–Mid–End Architecture

Build custom-length assemblies by combining:

Start module

Mid extension pieces

End module

Expand or shrink simply by adding or removing Mid pieces.

Supports any configuration example of:

221-412 (2-slot)

221-413 (3-slot)

221-415 (5-slot)

221-4xx series

221-6xx series 

This modularity gives the user full flexibility to design the exact setup they need.

⚡ Compatible with Two Major Wago Families

221-4xx Series

Designed for standard double-row Wago lever connectors widely used in electrical boxes, prototyping setups, and control panels.

221-6xx Series

Perfect for harnessing and inline cable routing where connectors are mounted along cable runs.

Both styles mount into the same DIN-rail system, making this design a unified platform for multiple connector types.

📏 Industrial DIN-Rail Ready

Fits standard 35 mm DIN rail (EN 60715)

Designed for a secure but tool-free snap-fit

Suitable for:

Home automation

Industrial cabinets

Prototyping

Distribution boxes

Low-voltage electrical wiring

🛠 Simple, Tool-Free Assembly

Clip the Start and End modules onto the DIN rail.

Add Mid modules until you reach the desired connector count.

Insert your Wago 221-4xx or 221-6xx connectors.

Done — clean, rigid, and easy to expand later.

The system assembles and disassembles quickly, making it ideal for iterative projects or field use.

♻ Optimized for 3D Printing

Support-free printing

Durable interlocking geometry

Strong print orientation

Efficient material usage

Designed around typical FDM printer tolerances

PLA is perfect for general use, while PETG is recommended for warm or enclosed electrical cabinets.

📦 Recommended Print Settings

SettingValue
MaterialPLA / PETG
Layer Height0.2 mm
Walls3–4
Infill20–30%
SupportsNone
OrientationFlat base

🧵 Design Motivation

Wago 221 connectors offer fast, tool-free wiring — but they are often left loose, taped down, or scattered around panels and boxes.

This design solves the problem by offering:

A structured, repeatable mounting system

Clean organization on DIN rails

Scalability for any number of connectors

A unified solution for both 4xx and 6xx series

It brings order, safety, and a truly professional look to wiring.