ON30 Freight Truck / Bogie With Coupler Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ON30 freight trucks for model railroad.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
The goal for this project was to create an ON30 truck, and make it as 3d printed as possible. The result I think is quite good. I printed everything in Petg. The couplers sit in the coupler pocket on the truck frame, then the coupler plate is glued on top with a few dots of CA glue to hold it from popping out. I used m3x12 screws to screw the trucks onto my car, leaving the screw barely loose so the trucks can rotate freely.
Hardware required:
8 MR52ZZ Ball Bearings for wheels.
Bachmann EZ Mate Couplers
The only thing that needs support is the truck frame. After printing, press the bearings on the wheels, press the wheels onto the axle, then the wheel sets can be placed into the truck frame by bending the sides. I got good results with cleaning the bearings in acetone to clean out the grease. If the wheels don't free wheel enough after putting the set in the frame, gently bend out the truck sides to increase the clearance. I installed these trucks in a home made car with very little weight, and all wheels rotate freely.