Parametric Decksaver (spiral vase option, universal: fits all rectangular Synths)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This OpenSCAD model is a fully parameterised lid, decksaver or dust cover for synthesizers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model can be adjusted to any rectangular synth size, as long as it fits your print bed.
You can also adjust various other parameters to fit it to your needs. If you really want to go fast, you can even print this in spiral vase mode but keep in mind that your print could come out a little bit flimsy.
Use my OpenSCAD file to generate the basic shape of your cover and customise it in your slicer (logos etc..).
Print instructions:
- get openscad https://openscad.org/downloads.html
- download decksaver.zip and unpack (keep the files in the same folder)
- open decksaver.scad with openscad, on the right you will see the “Customizer” and some presets. Maybe you are lucky and your synth is already listed there.
- …if not: measure your synth and adjust the parameters to your needs
- hit “render” (F9)
- hit STL export (F7)
- head over to your slicer…
Before you print the whole thing, i recommend to print a jig to make sure your final print will fit your synth. You can easily do this by sinking the print to the chamfer which will sit on your synth in your slicer.
If your synth was not listed in the presets and you made a successful print, please let me know the parameters or post them in the makes, so i can add them to the list and make life easier for others.
Synth overview:
| Vendor | Model | OpenSCAD parameters | 3mf |
|---|---|---|---|
| Elektron | DigiX/I/II | ✅ | ✅ |
| Soma | Lyra 8 | ✅ | ✅ |
Other tips:
- laaaaaarge print bed needed
- this print will profit from a large nozzle (0.6 and more)
- PLA is fine, if you really want to go for PETG prepare for warping
- calibrate your first layer carefully
- my Lyra 8 Decksaver came out really sturdy and feels like something you can buy off the shelves (0.6n, 2 walls, 5 layers for the ceiling)
- i used “octagram spiral” as bottom surface pattern tho give the print this star-like pattern
- maybe your synth is already listed in the presets or there even is a 3mf