IP camera holder for Anycubic Kobra S1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for the IP camera so that you have much better view on whats going with the printer
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 737
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello. I present to you my camera holder design. The design allows to take the camera off the printer when for example you want to open upper window/front doors. It is mostly designed for IP camera Xiaomi C200.
You will need to print the additional camera mount which you can find here: https://www.printables.com/model/774839-xiaomi-c200-mount-pad
You will also need to use some m3 screws and M3 nuts.
I prrinted the whole thing with PLA, using 3 wall loops, and gyroid infill, feels pretty solid.
Installation:
1. grab the upper window and take it out.
2. unscrewew 2 screws holding the window handle
3. flip the handle 180° so that the handle works as a hook.
4. Screw 2 screws of the handle to the window
5. Put the window on the printer
6. Print the xiaomi mount pad
7. Screw the mount pad with the printed camera holder together using 2xM3 screws and nuts
8. Assemble the IP camera with the camera holder
9. Hang it on the upper handle
10. Enjoy.
I suggest orienting the print on the build plate just like I did (see the slicer screenshot)