1 / 1
enforced crank shaft for 'easy hand crank for Pastamatic'
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement of the crank-shaft using a 4mm bolt to attach to the lever this version is unlikely to ever break
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The crank-shaft that comes with the Easy hand crank for Pastamatic by @thoperSought broke after a few minutes of use. It is originally attached to the lever by a nipple that is held in place by a small clip. I remixed the shaft to use a screw to attach it to the lever.
hardware required:
- 1 M4x40mm screw,
- 1 14mm/4,3mm washer
- 1 M4 secure nut
(This is only the crank-shaft - please download the remaining parts from the original design)