1 / 2
Labubu Antlers - 30-Minutes, No Supports, Low Poly
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick-print holiday accessory for Labubu figures. No supports, no assembly. Ready in 30 minutes. Easy and clean.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 158
- Wydruki
- 0
- Wyświetlenia
- 697
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (38)Powiązane
Quick Facts
- Design: Antlers sized to fit Labubu figures—snap attachment, no glue or tools needed.
- Speed: Complete print in 31 minutes 42 seconds—perfect for last-minute holiday printing.
- Function: Adds festive personality to Labubu collections for Christmas or winter seasonal display.
- Assembly: Zero-assembly design—print and attach immediately.
Print Settings (Tested on Ender-3 V2)
| Setting | Value |
|---|---|
| Filament Length | 1.30 m |
| Total Weight | 1.63 g |
| Print Time | 31m 42s |
| Supports | None required |
| Layer Height | 0.20 mm (standard) |
| Nozzle/Bed Temp | 200°C / 60°C |
Printing Notes
- Preview your slicer output to ensure proper bed adhesion on the antler tips.
- .3mf files are optimized for Ender-3 V2 with BLTouch bed leveling.
- Light post-processing (sanding burrs) improves attachment fit if needed.
Community Note: If you print one, share your holiday Labubu! Let me know how the antlers attach and if you have suggestions for other seasonal accessories.