Nissan Rogue console tray organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For the small tray in front of the shift lever on a 2nd generation (2014-2020) Nissan Rogue.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 557
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You can still access the lighter/power socket and the car's USB-A port with a cable. The pen slots will hold up to a standard Sharpie marker. There is a slot on the side to keep a quarter for the shopping cart at Aldi. Fits on top of the rubber tray liner. I have a 2016 Rogue and have also tried it in someone else's 2020 model. So I expect it should fit all the 2nd generation Rogues from ‘14-’20.
I suggest printing in PETG or something else that can hold up to summer temps without warping. PLA is probably a poor choice for this. I had my filament temp set a little too high for my first print of this, so you can see some scarred areas where there were some cooling issues and the supports were more difficult to remove than they should have been.
Requires supports.