Paterson System 4 tank 5 reel column
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement column for Paterson System 4 5 reel developing tanks
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Replacement reel for the Paterson System 4 series 5 reel tanks, specifically designed for smaller printers with height limitations.
Print the bottom piece with the foot facing down, and supports enabled for best results.
Print the top piece with the flat edge facing down, and the agitator bar closer to the bottom with supports enabled for best results.
Once printed, use superglue (or perhaps acetone bonding on ABS) on the interface edge, and push the two pieces together. Make sure to check the orientation! The chamfered edge should be the mating edge between the two pieces, otherwise you will lose the ability to use the agitator.