1 / 5
FPV Drone Carry Box (Flywoo Firefly 16) with 12 battery slots
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the ultimate box to carry your (Flywoo Firefly 16) and the batteries...and even some spart parts.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 379
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (1)Kolekcje (10)Powiązane
Carry Box for Flywoo Firefly 16 (no support)
I needed a simple box that could carry my drone and the 12 batteries I have.
I couldn't find anything small enough to fit in my bag and also strong enough that it wouldn't break.
- Case fit a drone the size of a Firefly 16 (without prop guards)
- Battery slots are for betafpv 550 Lava 1s (the bt2 plug works on this model..so I am using the same batteries as my Meteor 75 pro)
- The slot in the middle is ideal for your tools, I hold them in a small plastic bag so they don't move during travel
How you can use the case:
- Hold your drone and batteries
- Take off pad for your drone (I use it when the ground is wet or when I am on the grass
How to print:
- PLA 12% infill is way enough
- I use a 0.4 mm Nozzle
- No support needed (print vertically with the flat side on the plate)
For perfect fit:
- the lid will be tight to slid in…just sand the corners a little bit and it will work nicely
I also have a box for the Meteor 75 pro if you also have one: https://www.printables.com/model/1417762-fpv-drone-carry-box-meteor-75-pro-with-12-battery