Male Garden Hose Plug (now with Female Cap)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A male 3/4" NH (American garden hose) plug and cap. This has a 3/4" hex head for grip, and a hole for a tether.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 154
- Wydruki
- 4
- Wyświetlenia
- 350
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Needing something to plug a few garden hoses for Winter, and not being completely satisfied with the other hose plug models on printables, here's what I came up with.
New Addition (2026-05-14): I've just encountered a need for a cap (the female adjoint of a male plug), so I've designed a matching one. Model files for that are included here as well.
Note: the threads are ¾" NH, also known as GHT — the standard thread used on garden hose fittings in the US and Canada. It is not compatible with the ¾" BSP fittings used in the UK and elsewhere.
Both plug and cap are designed to print "upside-down" (with the hexagonal face on the build plate) without supports.
None of these parameters are likely critical, but here's how I printed these on a Prusa Mini in PLA:
0.4 mm nozzle, 0.15 mm layer height
4 perimeters, scarf joints enabled on contours
15% cubic infill
Concentric top and bottom fill pattern (for looks)
I painted on seams to keep the seams aligned with one of the hex vertices
Atomic Neon Orange UV Reactive PLA
No supports, no brim
(Designed in FreeCAD.)