1 / 7
Rush Tank Solo Mount / FPV 20mm to 30mm Raiser — zdjęcie 1
1 / 7

Rush Tank Solo Mount / FPV 20mm to 30mm Raiser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I wanted to install a Rush Tank Solo on my Quad, but I noticed that the only mounting options it offers are 20x20 on…

Ocena
0 / 5
Polubienia
23
Pobrania
360
Wydruki
0
Wyświetlenia
2318
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

I wanted to install a Rush Tank Solo on my Quad, but I noticed that the only mounting options it offers are 20x20 on the top side of it.

Since I have my TBS Tracer right where my 20x20 Mounting Holes are on my Frame and I didnt want to put the big Heatsink of the Rush Tank Solo right up to the frame and my TBS Tracer on the backside of the Rush Tank Solo I designed this mount.

I decided that it would be best to print a little raiser with 20x20 mounting holes, so that I can mount my Rush Tank Solo right above the Tracer and have airflow to it from both sides effectively. With this approach I also didnt have to place my Tracer somewhere else.

Options with Sidewalls included, and different spacer heights for every use-case.

4 M3 screws with locknuts of fitting length for your spacers needed.

4 M2x4 screws for the Rush Tank Solo needed.

Category: R/C Vehicles

Tagi