Mini Diabolo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mini Diabolo design and it works good. If you like a bigger one skale it in your slicer Please post a make.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Print the caps with TPU for a longer lifespan for the diabolo, as other filaments tend to break quite easily. You can print the middle part with your desired filament. Make sure you use a suitable screw that fits the hole; it has a diameter of 7mm. Your screw should have the same weight on both ends. If that's too much work, you can, of course, print the diabolo in one piece.
Please post a make if you like this model (you will earn Prusameters).
and if you are interested in outdoor sports and games also check out this Model: