Festool Clamp/Tool Holder for KAPEX Underframe (KS-60-E-UG)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Festool Clamp/Tool Holder for KAPEX Underframe (KS-60-E-UG)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This holder has especially been made for the underframe of the Festool KAPEX KS-60-E and can hold up to 4 tools.
The main_body.stl is available in two versions: with/without Festool logo.
Mounting is very easy:
Print the main_body.stl and counterpart.stl with the below mentioned settings in PETG.
Click the main body part onto the round rail of the KAPEX underframe as shown on the pic.
Once you turned it upright as shown simply place the counterpart behind the main body so that the 5mm holes align.
Use a M5x10 screw to combine both parts.
Looking for OTHER FESTOOL PARTS & GADGETS?
Have fun!
Material: PETG
Infill: 50%
Layheight: 0.2mm
Supports: Yes (Tree support, only on base plate)
BRIM: Yes (10mm)