Wall-hanging Clock (Large 370mm Clockface)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a project of a large 370mm wall-hanging clock
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 493
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 370mm diameter clock. The clock follows the traditional design.
As I am using an Ender 3 V2, the build plate is not large enough to print the clockface in one go. Hence, the clockface is divided into five parts. The frame of the clock is also needed to be printed in four identical parts.
For the patterns and the numbering on the clockface, I used the filament change function of the PrusaSlicer. If other slicers are preferred, those features may be painted instead of using a different colored filament. For the mechanism of the clock, I used an Aliexpress kit that was equipped with Wifi automatic time adjustment function, which cost around 10 USD. If other kits are used, users may simply modify the rectangular space to suit the kits.