1 / 4
Osmosis system water leak collection for leak sensor — zdjęcie 1
1 / 4

Osmosis system water leak collection for leak sensor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Osmosis system water leak collection for leak sensor

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
38
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Public Domain

Collect all the water which could leak until 4cm away from the osmosis system and bring it in the center where the leak sensor is. Here on the picture it was printed with 0.24mm layer which only for prototyping. a smaller layer would be better.  All 4 corners are nearly 10mm high and the center is 5mm high from the ground. I printed it with 2 walls and 5% infill  in PLA. in 3 parts to be glued. Printed on Bambu Lab H2D

Tagi