1 / 4
Organizer Tray for Tubes, Glue, Grease, Solvents
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had all my tubes and small bottles in a plastic tray where they just slid around. I decided to make this tray to…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
I had all my tubes and small bottles in a plastic tray where they just slid around. I decided to make this tray to hold them vertical where they are easy to see and will last longer. The pockets are 20mm x 20mm, 30mm x30mm, 50mm x50mm, and 40mm x 70mm. The tray is 225mm by 180mm by 55mm high. Walls and bottom are 1.5mm thick. This is a fairly large object which takes 300grams of filament. PLA works fine but any filament would be fine for this Thing.
Category: Organization