1 / 1
PTFE tube guide (Ø4) e.g. for neat arrangement along the printer housing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For neat routing of the tubes to the filament feed, I designed this holder for my printer housing.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
fit to printer housing https://www.printables.com/model/1175205-prusa-xl-enclosure-below-120-eur
Part list:
- printed part | quantity: 1
- e.g. cylinder head screw M4x20 | quantity: 2
Print instruction:
- material: PETG
- supports: partial required
- layer height: 0,25mm or 0,32mm
- nozzle diameter: 0,4mm or 0,6mm
- brim: not required
- enclosure: not required