Slim Centre for FormFutura Refill Flanges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted a slim centre to hold the FormFutura refill flanges in place.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Created a simple and slim screw and nut centre for the FormFutura refill flanges. Inner diameter is 49mm.
Should work with the following FormFutura refill flange models.
- https://www.printables.com/model/959230-formfutura-refill-20-flanges
- https://www.printables.com/model/1001584-formfutura-refill-systems/files
Will fit over the original CoreOne side spool holder and the following other dry box versions.
- https://www.printables.com/model/1235729-core-one-drybox
- https://www.printables.com/model/1104052-prusa-core-one-printable-drybox
The files provided are for personal use at your own risk. I make no warranties, express or implied, regarding the safety, reliability, or suitability of any printed models. You are solely responsible for verifying that any downloaded design is safe, functional, and appropriate for your intended use, including but not limited to material choice, print settings, and post-processing. By downloading or using these files, you agree that I am not liable for any damages, failures, or consequences resulting from their use.