Nerf Longstrike Full length Direct Plunger Conversion Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since a handful of people asked, here is a full-length pusher to replace the original N-strike pusher with a direct…
- Ocena
- 4 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 202
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — NoDerivatives
Since a handful of people asked, here is a full-length pusher to replace the original N-strike pusher with a direct plunger compatible replacement. With a handful of parts from Outofdarts.com, the Longstrike can be fully converted to Direct Plunger for a significant power boost.
Parts Included:
LSK 111028 Full Length Pusher-Breach
LSK 111023 Prophecy Plunger Conversion Block.
Parts needed:
Worker Prophecy/Retaliator Plunger Replacement
Longstrike Metal Catch
Longstrike Spring seat
O-rings for rear of Pusher
Retaliator sized upgrade spring.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.15
Infill:
100% Pusher, 40% Plunger Block
Filament: N/A PLA/PLA+ N/A
Notes:
2/13: LSK 111028 V1.15, Changed part label depth to address potential wall printing failure in characters
The supports settings should be on "Touching Build Plate" as the only spot where supports are needed is where the bolt sled connects to the pusher. This can be printed without supports, though that will require some cutting as some material will not be properly adhered.
Category: 3D Printing