Modulus Longstrike Half Dart Skinny Pusher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modulus Longstrike exclusive Half Length Skinny Pusher. This is not compatible with Retaliator/Prophecy Plunger tubes
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 13
- Wydruki
- 1
- Wyświetlenia
- 133
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — NoDerivatives
Modulus Longstrike exclusive Half Length Skinny Pusher. This is not compatible with Retaliator/Prophecy Plunger tubes as the rear seal for the pusher is a larger diameter due to the Plunger tube outlet's diameter being unique to this blaster. This also means that the Plunger tube block is also not compatible should one desire to do an XPT conversion.
This is NOT a Complete conversion kit. This is merely the pusher.
Additional Parts Needed:
- Longstrike Half-length dart gate
- Short Aluminum Barrel
- 12x2mm O-ring (x2)
- 8x1.5mm O-ring (x1)
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.15 mm
Infill:
100%
Filament: N/A PLA, PLA+
Notes:
Just needs support for bolt sled connection. Either using "print plate only" or another option that customizes support locations.
Category: 3D Printing