Nerf Longstrike "Windchester Rifle" Pump Grip 1.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"Bolt on" parts for the Nerf Longstrike, no shell cutting or blaster disassmbly required. The Rifle Version is designed…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
"Bolt on" parts for the Nerf Longstrike, no shell cutting or blaster disassembly required. The Rifle Version is designed to work with the Longstrike barrel attachment installed. Fully functional prototype, operated with stock spring load. Currently has not been tested with higher spring loads. External priming bars design. Designed for 3/4 in x 1/8 in x 12 1/4 in aluminum priming bars. Additional hardware needed. -4-8 1/4x20 lock nuts -4 1/4x20 short bolts -7 large Nerf blaster body screws -1 1/4/20 long threaded rod or stud equivalent all of these are needed hardware, but I am still working on more specific details which may change with subsequent updates to the parts
9/02/2026:
I have long since abandoned this particular project. There is a pump grip in the works but is a ground up new design and I haven't had as much time or motivation to finish as I used to.
Print Settings
Printer Brand:
Ultimaker
Printer:
Supports:
Yes
Infill:
20
Filament: unkown. PLA
Notes:
I'm not super familiar with 3D printing yet. Whatever settings I've used I have no guarantee if they are optimal.
Category: Sport & Outdoors