1 / 3
Bookshelf Homelab Micro Rack
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple rack to host a rack of Rasperry Pis, Netgear GS308E managed switch, 8x patchthrough jacks and a Netgate SG-3100
- Ocena
- 5 / 5
- Polubienia
- 414
- Pobrania
- 911
- Wydruki
- 7
- Wyświetlenia
- 11 922
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (23)Wydruki i komentarze (Wydruki: 7) (Komentarze: 24)Remiksy (11)Kolekcje (604)Powiązane
Instructions and other files to follow, just making the STLs available for now.
EDIT: New bits of info since original posting:
- Print all panels back to front. For the pi panels, you will need tiny supports for the notch that fits into the supporting rail.
- The bridge struts need to be mirrored- there is not a file per strut.
- There IS a file per left/right right vertical struts, even though they are just mirrored.
- These were the passthrough jacks used; they snap into place. https://www.amazon.ca/gp/product/B09H5JZDLH/
- The single passthrough STL is for interest and is not needed to construct the rack as shown.
- The supporting rail for the pi panels was not present on first upload- you will need to grab it if you downloaded the files in the first few hours.
- All the trim (except for pis) is currently in one STL- will break it out when I can.