DeWalt DCF513B 20V Ratchet Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed/printed a wall-mounted holder for the DeWalt DCF513B 20V Ratchet and wanted to share the printing details for
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
DeWalt DCF513B 20V Ratchet Wall Mount – Print Info & Notes
I designed/printed a wall-mounted holder for the DeWalt DCF513B 20V Ratchet and wanted to share the printing details for anyone interested in making their own.
Print Settings Used:
Walls: 3 outer walls
Top/Bottom Layers: 3
Infill: 20%
Orientation: Printed with the angled face down on the build plate
Supports: No supports needed
Why This Orientation Works:
Printing it angled face-down allows the layer lines to run diagonally through all the major stress points, which adds strength where it matters most—especially around the hook and cradle areas. This orientation also eliminates the need for supports, keeping the surface clean and the print efficient.
Notes:
20% infill provided plenty of rigidity, but the wall count and print orientation are what really contribute to its strength.
Prototype Disclaimer:
The holder shown in the photos is the very first prototype. All fitment tweaks, spacing adjustments, and usability improvements have already been applied to the updated and final model.