1 / 5
Fungineers Funwheel X7 Convertible Fender — zdjęcie 1
1 / 5

Fungineers Funwheel X7 Convertible Fender

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Decided to take my mini fenders a step further and added a snap in top fender. Haven't had a chance to test yet.

Ocena
5 / 5
Polubienia
7
Pobrania
43
Wydruki
2
Wyświetlenia
406
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print fenders in ABS or PETG, Mud guards best printed in TPU.

Use your own judgement for infil. 

This will only work on rails with same footpad angle and distance as X7. Really probably only the X7. Definitely won't work on X10

Tested this out and felt the gap between the tire and the top fender looked a little big. To reduce at the appearance of the gap, I redesigned the top fender a little wider and so that it wraps around the sides of the tire a little more. I included both the original and redesigned top fender. It's very easy to put the top fender on and seems secure enough for cruising around on pavement. If your into bonking off rocks, jumping down curbs or rough trail riding, I don't know if the top fender will stay put.

I added a new updated top fender. It's very slightly thicker, with the intention of being a little stronger and stiffer to hold in place better. The previous fender come out a little asymmetric, so I triple checked that this one is perfectly symmetrical.. I also added a little bit of a slope to tabs so that when printed on its side they don't need supports.