Avionics Altimeter Clock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Commercial Use - No Derivative
4-piece model designed around a single extruder printer with no MMU and a standard 220 mm³ build volume. Uses a standard cheap clock mechanism; needs the threaded region to be at least 8 mm long.
Clock Face: Print with the back of the face against the build plate; good bed adhesion and supports are required. While slicing, add a pause for a filament change at 14.1 mm height.
Bottom Deco piece: same idea as the clock face, but the filament change should be at 4.2 mm height.
The mercury indicator is the same thickness as the deco piece and follows the same height for the filament change.
Bezel: print vertically with a flat edge against the build plate and supports enabled.
All parts glue together easily for assembly.