Nale's Honorblade - Dummy-13
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Dummy-13 model of Nale's Honorblade from Brandon Sanderson's "Stormlight Archive" series.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
“Justice does not expire.”
-Nale, Words of Radiance by Brandon Sanderson
This model is based upon the artwork of Antti Hakosaari, Petar Penev, and others.
Need your Dummy13 to start hunting down criminals, miscreants, and other radiants? Then you'll need to equip them for the job with Nale's Honorblade.
When printing, lay this model flat on one side of the blade. As with my other honorblades, I recommend using tree supports to make sure the tip of the blade doesn't droop - you'll need it quite intact for your Honorblade stand.
NOTE: In accordance with Brandon Sanderson's Copyrights, under no circumstances are these files or prints from these files allowed to be used in any commercial fashion; that is, no one may make money from these in any way.
If you're looking to collect and display the whole set, you can find them here:
Honorblade Stand
Battar's Honorblade
Chanarach's Honorblade
Ishar's Honorblade
Jezrien's Honorblade
Kalak's Honorblade
Nale's Honorblade
Pralla's Honorblade
Shalash's Honorblade
Talenel's Honorblade
Vedel's Honorblade