Fuel filter quick disconnect tool with longer tabs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original wasn't long enough to reach the release tabs on my 2003 Tahoe. So I lengthened the tabs in tinkercad and…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 506
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The original wasn't long enough to reach the release tabs on my 2003 Tahoe. So I lengthened the tabs in tinkercad and reprinted it.
I ended up pushing them in with a narrow open ended 11 mm wrench, then once they were both seated I put a 19 mm wrench between the filter and the line and pulled. Both printed parts broke into three pieces, but the line popped right off.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
I set my walls to 6 and my layers to 8 so there was no infill.
Filament: MakerBot PLA Black
Category: Tools