1 / 4
3" Planter Tray – Smooth Finish Print
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drip tray for https://www.printables.com/model/1349326-76mm-3-inch-square-nursery-planter-enhanced
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed to match the footprint of the Gathering Moss 3" planter, this drip tray fits snugly while maintaining a clean, modern look. It’s watertight, stackable, and prints beautifully with either PLA or PETG.
Material Options:
- PLA build + PETG interface supports – best for fast, smooth prints with a glossy base finish and crisp edges.
- PETG-HF build + PLA interface – ideal for higher-temperature or outdoor use, still keeping that injection-molded surface from the PLA interface layer.
Recommended Settings (Bambu printers):
- Nozzle: 0.4 mm Layer height: 0.2 mm Infill: 15–20 % (grid or gyroid)
- 5 top / 5 bottom layers for watertightness
- Ironing ON for the top surface
- Smooth build plate (textured optional for matte finish)
- Supports ON → “Support Interface Only” with 2 interface layers
Features:
- Tight tolerance fit with GM Planter bottom
- Slight outer lip prevents overflow and strengthens edges
- Shallow angle sides for easy nesting / stacking
- Compatible with standard 1020 nursery trays
Notes:
This design was tested on multiple Bambu printers using both material setups.