Ballerina-Music-Figurine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a figurine of a Ballerina like character I created in Automatic 1111 some time ago and recently converted 2 3d.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This model should be printed in 3 pieces and assembled using hot glue or another method that will create a bond. It can be printed from the original version if you want to add much support to the model. It will break otherwise because the point of contact at the feet is such a small area holding the model as it print becomes very unstable and eventually breaks without support. I have included the original AI image I created and used to make the 3d render. This might be good for a music box top or just to print for fun! I used SOLEYIN ULTRA PLA to print and the gcode file is setup to print with 210c nozzle and 55c bed which worked well with that filament. Good luck printing! I hope you enjoy this model as much as I enjoyed creating it.