1 / 6
Heavy Duty Monitor / Tablet / Book Stand — zdjęcie 1
1 / 6

Heavy Duty Monitor / Tablet / Book Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This stand is intended for portable monitors. I think mine is like 15 inch.

Ocena
4 / 5
Polubienia
24
Pobrania
56
Wydruki
1
Wyświetlenia
375
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

This stand is intended for portable monitors. I think mine is like 15 inch.

You need some M3 screws and nuts to assemble it:

4x 15 mm screws
3x 30 mm screws
6x M3 nut

When you assemble it do not fully fasten the 30 mm screws at first. The middle part has some tolerance to the bottom you should have a little space left and right maybe with a little spacer and then lock the screws so the middle part is somewhat alligned to the middle.

Consider to use self locking nuts at least for the 30mm at the bottom joints. So it will not loosen too fast

x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x

Revision of the top and middle part → V2
- Adjusted the length so it should fully utilize all the locking points on the bottom
- Adjusted the holes for the nuts tolerance was a bit too loose

could not print it yet my self so feedback is welcome

x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x

Please consider to use the V2 parts for top and middle!

Tagi