1 / 3
Vanočni skřitkove ztrhaný  Christmas elf torn — zdjęcie 1
1 / 3

Vanočni skřitkove ztrhaný Christmas elf torn

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Vanočni skřitkove ztrhaný odpadli po vanočnim blazinci The Christmas elves, plucked, fell off after the Christmas blizz

Ocena
0 / 5
Polubienia
4
Pobrania
78
Wydruki
0
Wyświetlenia
158
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Doporučená rychlost tisku 50 % – Tato pomalejší rychlost pomáhá zajistit čisté detaily a optimální kvalitu díky četným podpěrám stromů nebo mužete 100% ale záleži na tiskarně. Orientace tisk muže na stojaka. Výška vrstvy doporučuji 0.08 mm pro lepši detail ale taky mužete 0.16 mm. Materiál: Funguje dobře se standardním PLA nebo matným PLA. Vyplň 15% nebo 20%

 Recommended print speed 50% – This slower speed helps ensure clean details and optimal quality due to the numerous tree supports or you can 100% but it depends on the printer. The orientation of the print can be on the stand. I recommend a layer height of 0.08 mm for better detail but you can also 0.16 mm. Material: Works well with standard PLA or matte PLA.Fill 15% or 20%

Tagi