Nezuko 40x40 cm big poster

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x200mm in size

 You may print at higher layer heights below the Base Thickness of 0.48mm

 The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm

#0d1414 PLA Prusament Jet Black  Transmission Distance: 0.1

#003594 PLA Anycubic Blue  Transmission Distance: 2.7

#ff8da1 PLA Anycubic Pink  Transmission Distance: 5

#ffff55 PLA Elegoo Yellow  Transmission Distance: 6

#d8cab9 PLA Elegoo Beige  Transmission Distance: 2.5

#ffffff PLA Elegoo White  Transmission Distance: 4.3

This print uses 6 unique filaments

Swap Instructions:

Start with Jet Black

At layer #8 (0.72mm) swap to Blue

At layer #11 (0.96mm) swap to Pink

At layer #16 (1.36mm) swap to Yellow

At layer #19 (1.6mm) swap to Beige

At layer #22 (1.84mm) swap to White for the rest.

Tiled Printing Instructions:

Each Tile is it's own STL file (all saved in the STLs folder) with the correct Row and Column in the name.

The GridLayout.png shows each section and it's size in mm to help visualize.

It is important to note that in tiled images, some tiles will not have all of the color swaps and this is normal.

It might be possible to skip lower swaps if they will never be seen and use a Height Range Modifier to print

the lower portions faster.  Your image and colors will determine this.