1 / 1
Sovol SV08 Max Rear Fan Gasket (95A TPU) — zdjęcie 1

Sovol SV08 Max Rear Fan Gasket (95A TPU)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TPU gasket for Sovol SV08 Max rear fans—reduces vibration, seals chamber, uses original screws.

Ocena
0 / 5
Polubienia
7
Pobrania
34
Wydruki
0
Wyświetlenia
139
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Sovol SV08 Max Rear Fan Gasket (95A TPU)

Description:
Upgrade your Sovol SV08 Max with this custom rear fan gasket, designed in Fusion 360 for a precise fit around the dual rear exhaust fans. Printed in flexible 95A TPU, this gasket helps isolate vibration and seals the fan housing tightly against the chamber wall. The result is a cleaner airflow path and a subtle reduction in mechanical noise—while I haven’t measured with a decibel meter, I can hear a small difference. Installation is simple and uses the original fan screws—no hardware changes required.

 

🔧 Key Features:

  • Material: 95A TPU for vibration damping and flexibility
  • Fitment: Tailored for Sovol SV08 Max rear exhaust fans
  • Function: Seals the fan interface and reduces vibration transfer
  • Compatibility: Sovol SV08 Max
  • Design Intent: Improves chamber sealing and acoustic isolation
  • Hardware: Uses original screws—no mods needed
  • Observations: Slight audible improvement; no formal decibel testing

 

🖨 Recommended Print Settings:

  • Material: TPU (95A recommended)
  • Layer Height: 0.2 mm
  • Infill: 10–20% (lower infill improves pliability and gasket compression)
  • Sparse Infill Pattern: Gyroid
  • Walls: 2 walls
  • Supports: Not required
  • Print Speed: 20–30 mm/s for TPU
  • Bed Temp: 50–60°C
  • Nozzle Temp: 220–240°C

 

🛠 Installation Guide:

  1. Remove the rear fans from the Sovol SV08 Max.
  2. Place the gasket between the fan and the chamber wall, aligning the screw holes.
  3. Reinstall the fans using the original screws.
  4. Ensure the gasket is evenly compressed for a tight seal.

 

Why Use It?

This gasket helps reduce fan vibration and seals the rear exhaust interface, contributing to a quieter and more thermally stable chamber. With low infill and flexible TPU, it compresses easily for a snug fit—an easy upgrade for anyone chasing optimal conditions for high-temp materials.

 

 

Tagi