1 / 2
3D Scanner Pillar Marker
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pillar Marker for propping up a Model during a 3D Scan to elevate it off the Ground.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 174
- Wydruki
- 0
- Wyświetlenia
- 497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (39)Powiązane
BOM:
INSTRUCTIONS:
The Model is about 50mm Tall with a 40mm Diameter requiring neither Supports nor a Brim.
You'll be needing 18x ID 3mm / OD 6mm Scan Markers to populate all the Marker Flat Spots on the Model.