Smartie Smoker (W.I.P) (DO NOT INHALE)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a work in progress project. I will upload all files individually when i have the finished models.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This page is for a smartie dust dispenser that I am currently making. I will be posting all of my progress and models.
How to use:
Use the Smartie Smasher to crush up any remotely-hard candy (So far smarties work best) into a fine dust. Then, pour the candy dust into the Smartie Smoker from the bottom opening with the screw, Then close the screw opening and suck the dust through the tip (DO NOT INHALE)
Printing Recommendations:
Use a food-safe filament, print on the tip, DO NOT USE BED ADHESION!!, use as less supports as possible, RISKY PRINT!!
Please message me if you found anything wrong with anything. Recommendations are greatly appreciated.